康宝莱仪表（珠海）有限公司

服务**：13928079019

产品资料

查看大图

产品名称：PD765 X2数显表
产品型号：PD765
产品厂商：PRECISION
产品价格：0
折扣价格：0
产品文档：

你添加了1件商品查看购物车

简单介绍：

Description: Process & Temperature Meter Process Inputs: 0-20 mA, 4-20 mA, 1-5 V, -10 to 10 V Temperature Inputs: J, K, T, E TC; 100 Ω Pt RTD Display: 1.20" (30.5 mm) Red LED 4-Digit Case: 1/8 DIN, Hi

详情介绍：

Trident and Trident X2 Digital Panel Meter

I'd like to make an inquiry on these products

Features

4-20 mA, ± 10 V, TC & RTD Inputs
NEMA 4X, IP65 Front
Shallow Depth Case 3.6" Behind Panel
Universal Power Supply 85-265 VAC
Two Relays Option with Alternation & Time Delays
4-20 mA Analog Output Option
24 VDC @ 200 mA Transmitter Power Option
RS-232, RS-422/485 Serial Communication Options
Free Modbus^® RTU Protocol & LabVIEW^™ Driver
Sunlight Readable Display
3 Year Warranty
Free MeterView Software Download

Has the largest display of any eight DIN Meter

FEATURE RICH AND SIMPLE TO USE

The Model PD765 Trident digital panel meter is one of the most versatile digital panel meters on the market and will satisfy a wide variety of process applications. The Trident can be field programmed to accept process voltage (0-5V, 1-5V, etc) and current (4-20 mA) inputs, 100 Ohm RTDs, and the four most common thermocouples. It is housed in a shallow-depth, 1/8 DIN enclosure that features a NEMA 4X front panel and convenient mounting hardware. There are two power options for the Trident: 85 to 265 VAC or 12-36 VDC and it can provide 24 VDC to power the transmitter if needed. Programming and setup can be performed with the four front panel pushbuttons, free MeterView software, or using the Copy function.

TWO DISPLAY SIZES
The display height on the standard Trident meter is 0.56"(14.2 mm) and on the Trident X2 the display height is an astounding 1.2" (30.5 mm). The Trident X2 can be read easily from distances of up to 30 feet! Both meters are available with all Trident features. The intensity of the display on both versions of the Trident can be adjusted to compensate for various lighting conditions, including direct sunlight.

Click here to see
Trident X2 video

VERSATILE OPERATION

Look to the Trident meter for the key features and options you want and don't worry about getting bogged down in a confusing array of things you don't need. The Trident's Max/Min function, 2 relays, 4-20 mA output, serial communication, and free Modbus RTU protocol provide all the utility you need to handle all the common applications.

Maximum/Minimum

To display the maximum and minimum readings since the last reset/power-up, use the Up arrow/Max button

Powerful Relay Functionality

All relay functions are set up from the front panel or from a PC running MeterView® or LabView™ software.

Automatic reset only
Automatic or manual reset
Latching or non-latching relays
Pump alternation control
On and off time delays from 0 to 199 seconds
Fail-safe operation is user selectable

Pump Alternation

The Trident, in pump alternation mode, will automatically alternate two pumps:


Relay #1 turns the main pump on at 6000 gallons and turns it off at 1000 gallons	With the Pump Alternation feature activated, the next time the level reaches 6000 gallons, relay #2 transfers and starts the backup pump.

Isolated 4-20 mA Transmitter Output

The Trident's Isolated 4-20 mA output option converts the Trident into a transmitter with a digital display; perfect for temperature applications!

Serial Communication Adapters & Converters

A wide variety of serial communication adapters and converters are available for the Trident meter. A serial adapter and Precision Digital’s free MeterView software allows the Trident to be programmed from a computer and to connect to a PC for data acquisition. Adapters are available for RS-232 and RS-422/485 communications. Converters are available for isolated and non-isolated RS-232 to RS-422/485 and USB to RS-422/485.

Modbus RTU

Use the Trident’s Modbus RTU communications to connect the Trident to a PLC, SCADA system or other digital device.

EASY SETUP AND PROGRAMING

The Trident is easily setup and programmed using the simple four-button programming method. The meter can also be programmed using a PC and Precision Digital's free MeterView software or "cloned" with the Copy function.
There is only one switch on the entire meter, no jumpers, and no need to ever open the case.

Programming with Four Front Panel Buttons

The Trident’s four front panel buttons keep the user in control of the programming process. To see how simple it is to program the Trident, click here.

Trident Virtual Meter

Programming From a PC with MeterView^®

Precision Digital’s free MeterView software allows all PD765 Trident setup parameters to be programmed from a PC and to save the configuration settings to a file for reporting or programming other meters. And since the serial adapter is an external device, one serial adapter can program an infinite number of meters!

The MeterView screen shot above shows how the input is selected. Notice there are tabs for Scaling, Relays/Alarms, Advanced, and Factory Values.

Meter Copy

The Copy function is used to copy (or clone) all the settings from one Trident meter to other Trident meters in less than 10 seconds. The Copy function is a standard feature on all meters. The Copy feature does not require a serial communication adapter, it only requires the optional cable assembly (PDA7420), see the ordering information for complete details.

NEMA 4 & 4X FIELD ENCLOSURES

Plastic, stainless steel, and painted steel NEMA 4X enclosures for up to 10 Trident meters.

PDA2706

Trident X2 inside PDA2801

DATA ACQUISITION

Digital Panel Meters make a great front end to a PC-based data acquisition system. They are easy to set up, can be used for a wide range of inputs, will power the transmitter, and best of all provide a local display of the process. Precision Digital has the perfect package with its Trident Digital Panel Meters, a wide selection of serial adapters and converters and free MeterView software. Data is displayed on the PC and written to a file that could then be imported into a spreadsheet or other application.

Data Logging up to 100 Trident Meters

Sample File Generated by MeterView^®

Great for tank level monitoring!

Ordering Example:
System consisting of 10 Tridents & MeterView
Qty	Model	Description
10	PD765-6R2-10	Trident with 2 Relays & 24 VDC Transmitter Supply
10	PDA7422	Trident RS-422/485 Serial Adapter
1	PDA8485-I	USB to RS-422/485 Isolated Converter
1	PDA7503-2	MeterView Software for 1-10 Meters

Process & Temperature Inputs

The Trident is factory calibrated to accept 4-20 mA, ±10 VDC, type J, K, T, or E thermocouples and 100 Ω platinum RTDs. Process inputs can be scaled with or without applying an input for virtually any engineering units. Temperature inputs can be programmed to display in degrees Fahrenheit or Celsius and the type K thermocouple can display up to 2300 °F.

Current & Voltage Inputs

Setting up the meter to accept a current or voltage input could not be easier. All setup is performed with the front panel buttons and there are no switches or jumpers to deal with.

Transmitter Powered by External Supply

Transmitter Powered by Internal Supply (optional)

Current Overload Protection

To protect the instrument from unexpected current overload the current input circuit contains a resettable fuse. The fuse limits the current to a safe level when it detects a fault condition, and automatically resets itself when the fault condition is removed.

Thermocouple & RTD Inputs

Setting up the Trident to accept a thermocouple or RTD input is simply a matter of setting a switch at the rear of the case and selecting the input type from the menu. The meter accepts J, K, T, or E type thermocouples as well as two, three, or four-wire 100 Ω platinum RTDs.

Thermocouple and RTD Inputs

Connectors Location

Rear View

QUICK INSTALLATION

The Trident is housed in a shallow-depth case that is designed for easy installation and servicing. The extra large front bezel is rated Type 4X, IP65. The mounting brackets are locked in place to make it easy to mount the meter in the panel. Removable screw terminal connectors make for easy and convenient wiring.

Mounting Dimensions

Notes:
1. Panel cutout required: 1.772 x 3.622 (45 x 92)
2 Panel thickness: 0.040 – 0.250 (1.0 – 6.4)
3. Mounting brackets lock in place for easy mounting

SPECIFICATIONS

Except where noted all specifications apply to operation at +25°C.

General

Display: Trident: 0.56” (14.2 mm); Trident X2: 1.20” (30.5 mm) red LED, 4 digits (-1999 to 9999)
Display Intensity: Eight user selectable intensity levels
Front Panel: NEMA 4X, IP65; panel gasket provided
Programming Methods: Four front panel buttons, cloning with Copy feature, PC with MeterView or LabVIEW software, and Modbus registers. Certified LabVIEW driver available.
Noise Filter: Programmable 2 to 199 (0 will disable filter)
Display Update Rate: Process/RTD: 3.7-5/sec; TC: 1.8-2.5/sec
Overrange: Display flashes 9999
Underrange: Display flashes -1999
Recalibration: All inputs are calibrated at the factory; recalibration is recommended at least every 12 months.
Max/Min Display: Stored until reset by user or meter is turned off.
Password: Restricts modification of programmed settings.
Non-Volatile Memory: Settings stored for a minimum of 10 years.
Power Options: 85-265 VAC, 50/60 Hz; 90-265 VDC, 20 W max or 12-36 VDC; 12-24 VAC, 6 W max.
Required Fuse: UL Recognized, 5 A max, slow-blow; up to 6 meters may share one fuse.
Normal Mode Rejection: 64 dB at 50/60 Hz
Isolation: 4 kV input/output-to-power line;500 V input-to-output or output-to-24 VDC supplies
Operating Temperature: 0 to 65°C
Storage Temperature: -40 to 85°C
Relative Humidity: 0 to 90% non-condensing
Connections:
Power & Signal: removable screw terminal blocks accept 12 to 22 AWG.
Serial: RJ11 header, standard on all meters.
Enclosure: 1/8 DIN, high impact plastic, 94V-0, color; gray
Weight: 9.5 oz (269 g) (including options)
UL File Number: E160849; 508 Industrial Control Equipment
Warranty: 3 years parts & labor

Process Inputs

Inputs: Field selectable: 0-20 mA, 4-20 mA, 1-5 V, ±10 V
Accuracy: ±0.05% FS ±1 count; square root: ±0.1% FS ±2 counts
Function: Linear or square root
Low-Flow Cutoff: 0 to 9999 (0 disables cutoff function)
Decimal Point: Up to 3 decimals: d.ddd, dd.dd, ddd.d, or dddd
Calibration: Scale without signal or calibrate with signal source
Calibration Range: User programmable over entire range of meter
Input Impedance: Voltage range: greater than 1 M Ω, Current Range: 50-100 Ω, varies with resettable fuse impedance
Input Overload: Protected by automatically resettable fuse
Temperature Drift: ±50 PPM/°C
Transmitter Supply: Isolated, one or two transmitter supplies
P1: 24 VDC ±10% @ 200 mA max (-1 option)
P1 & P2: 24 VDC ±10% @ 200 mA & 40 mA max (-2 option)

Temperature Inputs

Inputs: Factory calibrated, field selectable: type J, K, T, or E thermocouples and 100 Ω platinum RTD (0.00385 or 0.00392 curve)
Resolution: 1°; type T: 1° or 0.1°
Cold Junction Reference: Automatic
Temperature Drift: ±2°C maximum
Offset Adjustment: Programmable to ±19.9°. This parameter allows the user to apply an offset value to the temperature being displayed.
Input Impedance: Greater than 100 k Ω
Sensor Break: All relays and alarm status LEDs go to alarm state.

Type	Range	Accuracy	Range	Accuracy
J	-58° to 1328°F	±2°F	-50 to 750°C	±1°C
K	-58º to 2300ºF	±2°F	-50 to 1260°C	±1°C
T	-292º to 700ºF	±2°F	-180 to 371°C	±1°C
E	-58º to 1700ºF	±2°F	-50 to 927°C	±1°C
RTD	-328º to 1382ºF	±1°F	-200 to 750°C	±1°C

Relays

Rating: 2 Form C (SPDT); rated 3 A @ 30 VDC or 3 A @ 250 VAC resistive load; 1/14 HP @ 125/250 VAC inductive loads
Deadband: 0-100% FS, user selectable
High or Low Alarm: User may program any alarm for high or low
Relay Operation:

Automatic (non-latching)
Latching
Pump alternation control

Relay Reset: User selectable via front panel buttons or PC

Automatic reset only (non-latching)
Automatic plus manual reset at any time (non-latching)
Manual reset only, at any time (latching)
Manual reset only after alarm condition has cleared (latching).

Automatic Reset: Relays reset when input passes the reset point
Manual Reset: Front panel button, MeterView, Modbus registers
Time Delay: 0 to 199 seconds, on and off delays; programmable
Fail-Safe Operation: Programmable, independent for each relay. Relay coils are energized in non-alarm condition. In case of power failure; relays will go to alarm state.
Auto Initialization: When power is applied to the meter, relays will reflect the state of the input to the meter.

Isolated 4-20 mA Transmitter Output

Scaling Range: 1.00 to 23.00 mA; reverse scaling allowed.
Calibration: Factory calibrated 4.00 to 20.00 mA
Accuracy: ±0.1% FS ±0.004 mA
Temperature Drift: 50 PPM/°C
Note: Analog output drift is separate from input drift
Isolation: 500 V input-to-output or output-to-24 VDC supplies; 4 kV output-to-power line
External Power: 35 VDC maximum
Output Loop Resistance:

Loop Resistance
Power Supply	Minimum	Maximum
24 VDC	10 Ω	700 Ω
35 VDC (external)	100 Ω	1200 Ω

Serial Communications

Compatibility: EIA-232, EIA-422, and EIA-485 with PDA7232 and PDA7422 Trident adapters.
Protocol: Two selectable. PDC protocol (for use with MeterView) and Modbus RTU
Meter Address: PDC protocol: 0 to 99, Modbus protocol: 1 to 247
Baud Rate: 300 to 19,200 bps
Transmit Time Delay: Programmable 0 to 199 ms or transmitter always on for RS-422 communications.
Data: 8 bit (1 start bit, 1 stop bit)
Parity: None (2 stop bits), even, or odd
(Modbus only; PDC protocol does not use parity)
Byte-to-Byte Timeout: 0.01 to 2.54 seconds (Modbus only)
Turn Around Delay: Less than 2 ms (fixed)
Refer to PDC and Modbus Serial Communications Protocol manuals for details.
Note: Both downloadable protocol register tables can be found in the documentation list below.

ORDERING INFORMATION

Products

Model

Description

Blue dot denotes item as a Quick Ship product

PD765-6R0-00

Trident Process & Temperature Meter; No Options Installed; Powered from 85-265 VAC

PD765-6R0-10

Trident Process & Temperature Meter; 24 VDC Transmitter Supply; Powered from 85-265 VAC

PD765-6R2-00

Trident Process & Temperature Meter; 2 Relays; Powered from 85-265 VAC

PD765-6R2-10

Trident Process & Temperature Meter; 2 Relays + 24 VDC Transmitter Supply; Powered from 85-265 VAC

PD765-6R3-00

Trident Process & Temperature Meter; 4-20 mA Output; Powered from 85-265 VAC

PD765-6R3-10

Trident Process & Temperature Meter; 4-20 mA Output + 24 VDC Transmitter Supply; Powered from 85-265 VAC

PD765-6R3-20

Trident Process & Temperature Meter; 4-20 mA Output + Dual 24 VDC Transmitter Supplies; Powered from 85-265 VAC

PD765-7R0-00

Trident Process & Temperature Meter; No Options Installed; Powered from 12-36 VDC

PD765-7R2-00

Trident Process & Temperature Meter; 2 Relays and 12-36; Powered from 12-36 VDC

PD765-7R3-00

Trident Process & Temperature Meter; 4-20 mA Output; Powered from 12-36 VDC

Trident X2

Model

Description

PD765-6X0-00

Trident X2 Process & Temperature Meter; No Options Installed; Powered from 85-265 VAC

PD765-6X0-10

Trident X2 Process & Temperature Meter; 24 VDC Transmitter Supply; Powered from 85-265 VAC

PD765-6X2-00

Trident X2 Process & Temperature Meter; 2 Relays; Powered from 85-265 VAC

PD765-6X2-10

Trident X2 Process & Temperature Meter; 2 Relays + 24 VDC Transmitter Supply; Powered from 85-265 VAC

PD765-6X3-00

Trident X2 Process & Temperature Meter; 4-20 mA Output; Powered from 85-265 VAC

PD765-6X3-10

Trident X2 Process & Temperature Meter; 4-20 mA Output + 24 VDC Transmitter Supply; Powered from 85-265 VAC

PD765-6X3-20

Trident X2 Process & Temperature Meter; 4-20 mA Output + Dual 24 VDC Transmitter Supplies; Powered from 85-265 VDC

PD765-7X0-00

Trident X2 Process & Temperature Meter; No Options Installed; Powered from 12-36 VDC

PD765-7X2-00

Trident X2 Process & Temperature Meter; 2 Relays and 12-36; Powered from 12-36 VDC

PD765-7X3-00

Trident X2 Process & Temperature Meter; 4-20 mA Output; Powered from 12-36 VDC

Enclosures

Model

Description

PDA2302

Economical Plastic NEMA 4X Enclosure for 2 Type A, B, C, or E Meters

PDA2303

Economical Plastic NEMA 4X Enclosure for 3 Type A, B, C, or E Meters

PDA2304

Economical Plastic NEMA 4X Enclosure for 4 Type A, B, C, or E Meters

PDA2305

Economical Plastic NEMA 4X Enclosure for 5 Type A, B, C, or E Meters

PDA2306

Economical Plastic NEMA 4X Enclosure for 6 Type A, B, C, or E Meters

PDA2307

Economical Plastic NEMA 4X Enclosure for 7 Type A, B, C, or E Meters

PDA2308

Economical Plastic NEMA 4X Enclosure for 8 Type A, B, C, or E Meters

PDA2309

Economical Plastic NEMA 4X Enclosure for 9 Type A, B, C, or E Meters

PDA2310

Economical Plastic NEMA 4X Enclosure for 10 Type A, B, C, or E Meters

PDA2312

Economical Plastic NEMA 4X Enclosure for 2 Type A, B, C, or E Meters

PDA2322

Economical Plastic NEMA 4X Enclosure for 1 Type D + 1 Type C Meter

PDA2407

Plastic NEMA 4X Enclosure for 1 Meter (Any Type)

PDA2411

Plastic NEMA 4X Enclosure for 2 Meter (Any Type)

PDA2414

Plastic NEMA 4X Enclosure for 1 Type D + 1 Type A, B, C or E Meter

PDA2501

Plastic NEMA 4X Enclosure for 1 Type C Meter

PDA2502

Plastic NEMA 4X Enclosure for 2 Type C Meters

PDA2503

Plastic NEMA 4X Enclosure for 3 Type C Meters

PDA2504

Plastic NEMA 4X Enclosure for 4 Type A, B, C, or E Meters

PDA2505

Plastic NEMA 4X Enclosure for 5 Type A, B, C, or E Meters

PDA2506

Plastic NEMA 4X Enclosure for 6 Type A, B, C, or E Meters

PDA2507

Plastic NEMA 4X Enclosure for 7 Type A, B, C, or E Meters

PDA2508

Plastic NEMA 4X Enclosure for 8 Type A, B, C, or E Meters

PDA2509

Plastic NEMA 4X Enclosure for 9 Type A, B, C, or E Meters

PDA2510

Plastic NEMA 4X Enclosure for 10 Type A, B, C, or E Meters

PDA2512

Plastic NEMA 4X Enclosure for 2 Type A, B, C, or E Meters

PDA2522

Plastic NEMA 4X Enclosure for 1 Type D + 1 Type C Meter

PDA2601

Stainless Steel NEMA 4X Enclosure for 1 Type C Meter

PDA2602

Stainless Steel NEMA 4X Enclosure for 2 Type C Meters

PDA2603

Stainless Steel NEMA 4X Enclosure for 3 Type C Meters

PDA2604

Stainless Steel NEMA 4X Enclosure for 4 Type A,B, C or E Meters

PDA2605

Stainless Steel NEMA 4X Enclosure for 5 Type A,B, C or E Meters

PDA2606

Stainless Steel NEMA 4X Enclosure for 6 Type A,B, C or E Meters

PDA2622

Stainless Steel NEMA 4X Enclosure for 1 Type D + 1 Type C Meter

PDA2701

Steel NEMA 4 Enclosure for 1 Type C Meter

PDA2702

Steel NEMA 4 Enclosure for 2 Type C Meters

PDA2703

Steel NEMA 4 Enclosure for 3 Type C Meters

PDA2704

Steel NEMA 4 Enclosure for 4 Type A, B, C, or E Meters

PDA2705

Steel NEMA 4 Enclosure for 4 Type A, B, C or E Meters

PDA2706

Steel NEMA 4 Enclosure for 5 Type A, B, C or E Meters

PDA2722

Steel NEMA 4X Enclosure for 1 Type D + 1 Type C Meter

PDA2801

Low-Cost Plastic NEMA 4X Enclosure for 1 Type C Meter

PDA2811

Low-Cost Plastic NEMA 4X Enclosure for 1 Meter (Type A, B, C or E)

PDA2812

Low-Cost Plastic NEMA 4X Enclosure for 2 Meters (Any type)

PDA2821

Low-Cost Plastic NEMA 4X Enclosure for 1 Type D Meter + 1 Type A, B, C or E Meter

Accessories

Model

Description

PDA7420

Trident Meter Copy Cable

PDA7232

Trident RS-232 Serial Adapter

PDA7422

Trident RS-422/485 Serial Adapter

PDA7485-I

RS-232 to RS-422/485 Isolated Converter

PDA7485-N

RS-232 to RS-422/485 Non-Isolated Converter

PDA7488

Trident RS-232 & RS-485 Isolated Multi-Input Adapter Board

PDA8485-I

USB to RS-422/485 Isolated Converter

PDA8485-N

USB to RS-422/485 Non-Isolated Converter

PDX6901

Suppressor (snubber): 0.01µF/470Ω,

姓名：

电话：

您的需求：

产品名称：PD765 X2数显表

Features

FEATURE RICH AND SIMPLE TO USE

VERSATILE OPERATION

Maximum/Minimum

Powerful Relay Functionality

Pump Alternation

Isolated 4-20 mA Transmitter Output

Serial Communication Adapters & Converters

Modbus RTU

EASY SETUP AND PROGRAMING

Programming with Four Front Panel Buttons

Trident Virtual Meter

Programming From a PC with MeterView®

Meter Copy

NEMA 4 & 4X FIELD ENCLOSURES

DATA ACQUISITION

Data Logging up to 100 Trident Meters

Sample File Generated by MeterView®

Process & Temperature Inputs

Current & Voltage Inputs

Current Overload Protection

Thermocouple & RTD Inputs

Connectors Location

QUICK INSTALLATION

Mounting Dimensions

SPECIFICATIONS

General

Process Inputs

Temperature Inputs

Relays

Isolated 4-20 mA Transmitter Output

Serial Communications

ORDERING INFORMATION

Products

Trident X2

Enclosures

Accessories

Programming From a PC with MeterView^®

Sample File Generated by MeterView^®