FEATURES
- Operation under any atmosphere conditions in a wide temperature range
- Possibility of either frontal and panoramic X-raying
ADVANTAGES
- The best ratio of mass and power consumption to X-raying capability
- Mains or built-in batteries power supply
- Can be used in mobile flaw detection laboratories
DESIGN
- The X-ray device consists of two units: an X-ray monoblock and a control panel, connected by a 25 m long frost-proof low voltage cable
- The device has self-contained protection means against reverse and scattered radiation thus providing operator safety without use of special protection means
| MAIN CHARACTERISTICS |
X-ray tube voltage |
250 кV |
| Focal spot |
 2,0 mm |
| Emission angle: |
| - with a slot collimator |
70 х 20° |
| - without collimators |
180°
|
|
Maximum thickness of steel accessible for testing with the use of:
|
| - РТ-2 film with luminescent screen VP-2 type * |
54 mm |
| - F8 film with metallic screens RCF (AGFA)* |
34 mm |
| - D7 film with 0,027 mm Pb foils ** |
26 mm |
| Voltage supply |
~ 220 V / = 24 V |
| Power consumption |
120 W |
| Weight: |
| - monoblock |
8,2 kg |
| - control panel |
1,9 kg |
|
Overall dimensions:
|
| - monoblock |
451х112х210 mm |
| - control panel |
245х75х155 mm |
| Operation temperature range |
-40 … +60 °C |
Distance between the monoblock and an X-ray film:* - 1,0 m, ** - 0,5m. Density of the film - 2,2.
Exposure time - 15 minutes. Development - 6 minutes, temperature 20°C, developer G128 (AGFA)
|
