FS-10798 Series Flow Switch FS-10798 珠海康宝莱仪表有限公司

康宝莱仪表（珠海）有限公司

服务**：13928079019

Email：sales@combine-inst.com

产品资料

查看大图

产品名称：FS-10798 Series Flow Switch
产品型号：FS-10798
产品厂商：GEMS 英国盖姆
产品价格：0
折扣价格：0
产品文档：

你添加了1件商品查看购物车

简单介绍：

流速设置: 液体 - 从0.5GPM 到20.0GPM; 气体- 见下表接口: 1/2" NPT 主要结构材质: 黄铜或不锈钢设置类型: 可调式

详情介绍：

FS-10798 Series Flow Switch
外部可调型流量开关，适用于水，油和气体

优势...

流速设置: 液体 - 从0.5GPM 到20.0GPM; 气体- 见下表
接口: 1/2" NPT
主要结构材质: 黄铜或不锈钢
设置类型: 可调式

概述 / 设计理念:

这类外部可调型流量开关是下列应用的理想选择：在冷却液流量故障时保护机床设备；在润滑剂较少时保护轴承；或确保适当的空气流量。FS-10798 系列产品
工作压力高达1000PSIG, 具有很宽的流量设置范围，同时具有极低的压损和极高的重复性。
采用－普通的平头螺丝刀，就可很方便到进行现场调节。现场校准后，为防止擅自改动，可将调节部分用螺丝锁紧。

应用:
- 电子设备: Laser Heads, Welders, Power Supplies, High Speed Spindles, X-Ray Tubes, Semiconductor Equipment
- 齿轮和轴承: Presses, Rotating Equipment, Conveyors, Machine Tools, Robotics
- Processing & Dispensing Equipment: Water Purifications and Filtering, X-Ray Film Processing, Beverage Dispensing, Chemical Additives, Gas Sampling, Distilling

性能参数:
接液材质
壳体		Brass or 316 Stainless Steel
活塞 (黄铜壳体)		Polysulfone for Water
活塞 (不锈钢壳体)		316 Stainless Steel Only
弹簧		316 Stainless Steel
O-Ring		Viton ®
Other Wetted Parts		Epoxy
压力范围
工作压力		1000 PSIG (68.9 bar)
耐压		2500 PSIG (172.4 bar)
破裂压		5000 PSIG (344.7 bar)
工作温度
With Brass or S.S. Piston		-20°F to +300°F (-29°C to +148.9°C)
With Polysulfone Piston		-20°F to +225°F (-29°C to +107.2°C)
其他参数
重复性		1% Maximum Deviation
设定点精度		±10% Maximum
设定点偏差		15% Maximum
开关*		SPDT, 20 VA
接口		1/2" NPT
电气连接		No. 18 AWG, 24" L., Polymeric Lead Wires

*These switches are not intended for use in freezing liquids or steam/high condensation environments. Contact Gems for alternative solutions if these environments exist.

Air/Gas Flow Adjustment Ranges
Water or oil flow units should not be utilized for air/gas applications. The FS-10798 Gas Flow configuration utilizes special dash-pot piston for reliability. The flow adjustment ranges are typical for air service. For other gases, the flow range will vary with the density of the gas. Please consult factory for more information.
For 5 PSIG Line* 1 to 75 SCFM Approx.
For 100 PSIG Line 3 to 160 SCFM Approx.
*Minimum 5 PSI line pressure required.

FS-10798 switches are U.L. Approved for Class I, Division 2, Groups A, B, C, D hazardous locations.

姓名：

电话：

您的需求：

产品名称：FS-10798 Series Flow Switch