康宝莱仪表（珠海）有限公司

服务**：13928079019

产品资料

查看大图

产品名称：M3500 系列新一代工业压力变送器
产品型号：M3500
产品厂商：美亚 Meriam
产品价格：0
折扣价格：0
产品文档：

你添加了1件商品查看购物车

简单介绍：

The M3500 is a high accuracy industrial pressure transmitter featuring HART® communications and a cast aluminum enclosure for indoor or outdoor use. Typical output accuracy is ±0.035% FS with no effec

详情介绍：

M3500 系列新一代工业压力变送器

Measurement Accuracy: ±0.025% FS including all effects of linearity, hysteresis, repeatability and temperature from -20º to +50º C (-4º to +122º F)
Output (mA / V) accuracy: ±0.05% FS including all effects of linearity, hysteresis, repeatability and temperature from -20º to +50º C (-4º to +122º F)
Traceability: NIST traceable certification is standard

Pressure ranges: Lower Sensor Limit (LSL) to Upper Sensor Limit (USL) listed below:
Differential [DI]: 0-1, 0-5, 0-15, 0-30, 0-100, 0-300, 0-500 PSID
Gauge [GI]: 0-15, 0-30, 0-50, 0-100, 0-300, 0-500, 0-1000, 0-3000 PSIG
Compound [CI] (PSIG): -15 to +15, -15 to +30, -15 to +50, -15 to +100, -15 to 300,
                                                -15 to +500, -15 to +1000, -15 to + 3000 PSIG
Absolute [AI]: 0-17.4, 0-38.7, 0-100, 0-1000 PSIA

Analog Span Limit
DI ,GI, and CI types: 4:1 turndown from Upper Sensor Limit (USL)
AI: 2:1 turndown from Upper Sensor Limit (USL)

Overpressure Limits
DI: 1000 PSI common mode pressure
     P1 (High) side only: 3x range
     P2 (Low) side only: 3x range or 150 PSI, whichever is less
GI, CI, AI: 2x Full Scale

Differential Pressure Sensors
Static Pressure effect on zero: worst case 0.025% URL per 100 PSI. See User’s Manual for further details. This    effect can be corrected by zeroing the unit at the desired static pressure using an equalizing manifold.

Static Pressure effect on accuracy: worst case 0.1% URL per 100 PSI. See User’s Manual for details.
Orientation effect on zero: installation orientations different from factory calibration orientation may cause zero offsets up to 1% F.S. on some ranges. Zero the M3500 in its installed position to eliminate zero offset.

Temperature Specifications
          Operating Range:     -20º to +70° C (-4º to +158° F)
          Calibrated Range:     -20º to +50º C (-4º to +122º F)
              Storage Range:     -20º to +70° C (-20º to +158° F)

Temperature effect on output accuracy when above 50º C: standard accuracy +0.005% F.S. per ºC

Wetted Parts
    DI: 316L SS and Viton® (Kalrez available, consult factory for other o-ring
               material options)
    GI, CI, AI: 316L SS

Damping: Exponential damping with user adjustable time constant, 0 (Off) to 60 seconds

Sensor Zero: push button or HART®. Differential Pressure units can have zero fully elevated
                    or suppressed within the Lower and Upper Sensor Limit

Trims: analog trims, lower sensor trim and upper sensor trim are available via push button or HART®

mA output failure modes:
    Saturation values: 3.9 mA and 20.48 mA
    Failure values: 3.8 mA and 22.5 mA

Internal electronics temperature measurement available from display and via HART®.

Pressure Applications: differential, vacuum, compound, gauge or absolute

Pressure Units:
PSI, inches of Water (ref. 20°C, 60°F and 4°C), kg/cm2, MPa, kPa, Pa, mbar, bar, cm of Water (ref. 20°C and 4°C), ft of Water (ref. 20°C, 60°F and 4°C), inches of Mercury @ 0°C, mm of Mercury @0°C, oz/sq in, User defined unit (linear scaling constant from PSI)

Flow applications: Square Root (Sq. Rt.) or Laminar Flow Element (Classical B & C method) applications

Flow Units:
    Volume flow: m3, l (liters), yd3, ft3, in3, US gal (US gallons), I gal (Imperial gallons),bbl (barrel), User defined unit
    Mass flow: lbs, tons, kg, STon (Short Tons), LTon (Long Tons), User defined unit
    Time: seconds, minutes, hours, days

Flow related features:
    Low Flow cut off value
    Total flow since last reset
    Reset total flow register to zero
    Total non-resettable flow

Level applications: Supports direct head and bubbler type level calculations for linear tanks (vertical), non-linear tanks (horizontal, cylindrical [flat or dished ends] and spherical), and custom strapping tables.

Level Units:
Height: yards, feet, inches, meters, centimeters, millimeters
Liquid volume: cubic inches, US gallons, Imperial gallon, barrels, cubic meters, liters, cubic yards, cubic feet,   percent, user defined unit (linear scaling constant)
Liquid mass: pounds, tons, kilograms, Short Tons, Long Tons, percent, user defined             unit (linear scaling constant)

Enclosure:     Aluminum casting, designed to
                    NEMA 4 requirements
                    Front and rear caps secured with set screws

Dimensions:   5.12” L x 3.56” Dia. x 4.57” H

Weight:         2.7 – 3.0 lbs

Conduit connections: ½” NPT (female), 2 ea., 1 permanent plug included

Pressure Manifold:
     Material: 316L SS
     Pressure connection(s): 1/8” NPT (female) for all pressure sensor types
     1/8” NPT(M) x ¼” NPT(F) 316L SS adapter(s) are included

Differential Pressure models are available with a standard 2 port manifold or optional 4 port manifold with bleed/flushing connections and plugs (5/16 – 24 SAE/MS J1926)

Display – 2 line LCD
    Upper line for up to 5 numeric characters
    Lower line for up to 6 alphanumeric characters
    Update rate: 3x per second
    Floating decimal point

Display orientation to be specified with order:
Standard, Clockwise [90º], Reverse [180º], or
Counterclockwise [270º] orientation

Name plate:
The name plate on top of the M3500 provides model and serial numbers plus other specifications. Loosen the lower right screw and slide to access the keypad.

Keypad:
Located under the name plate, the keypad consists of 4 arrow keys used for manual programming and trim adjustments (sensor zero, lower sensor trim, upper   sensor trim and analog trims).

Electrical connections:
    Six (6) position terminal block for
    • Loop Power & Communication (2- wire)
    • Two opto-coupler SPST switches
    • 1.3 mm diameter holes suitable for 16 – 25
        gauge solid or stranded wire
    Case grounding screw
    Test tabs for mA output
    Comm tabs for HART® communications

Power: 16 – 45 V DC
Load Curve:   Maximum Loop Resistance = (50 * Power Supply Voltage) - 800

Note: HART communication requires a minimum loop resistance of 250Ω (21V DC)

Outputs:
4 – 20 mA (2-wire)
HART® digital protocol
Two each, solid state opto-coupler SPST switches

Rating: DC, 0.25 mA max., Von = 0.7 V DC, Voff = 5.4V DC

Certifications: CE Mark

Environmental
Humidity Limits: 5 – 95% RH
Shock, Operating: 30 g, halve-sine, 11mSec pulse (tested in accordance with IEC-60068-2-27)
Vibration, Sinusoidal, Operating: 2g peak acceleration at 5-500 Hz (tested in accordance with IEC-60068-Vibration, Random, Operating: 6g rms acceleration at 5 to 2000 Hz (tested in accordance with IEC-60068-2-64)

Mounting

2” pipe mount with bracket, 316SS, for horizontal or vertical orientation mountings. Includes 2” U-bolts and hardware (zinc plated CS).

Standard bracket accommodates pipe mount or surface mounting

Standard Accessories
P/N Z1065        NIST Certificate with data
P/N Z9A683-1 1/8” NPT(M) x ¼” NPT(F) adapter (1 each for AI, CI and GI models), 316L SS
P/N Z9A683-2 1/8” NPT(M) x ¼” NPT(F) adapters (2 each for DI models), 316L SS
P/N Z9P120     Mounting bracket, 316 SS
P/N Z9A64       Mounting hardware kit, zinc plated CS, U-bolts (2 ea.), nuts, washers
P/N Z9R86       User’s Manual

Optional Accessories, Certifications and Tests
P/N Z1089         3-valve equalizing manifold kit, 316L SS, c/w pre-bent tubing & tube fittings
P/N Z9P130       Material Certification
P/N ZA33559    Hydrostatic Pressure Test
P/N Z1077         Tag, wired SS

姓名：

电话：

您的需求：

产品名称：M3500 系列新一代工业压力变送器

M3500 系列新一代工业压力变送器

M3500 系列新一代工业压力变送器