 |
The setpoint is adjusted with the help of knurled rotary knobs, and is displayed in digital format. Depending upon the ordered configuration, the controller includes the following characteristics:
- Two or three position PDPI controller
- Long (TV = 12...120 s), medium (TV = 6...75 ms) or short (TV = 1...15 s) time response
- 2 limit contacts (MIN / MAX) can be adjusted relative to the setpoint.
- Analog display for system deviation or actual value
- Switching outputs: 2 A / 250 V relay or 24 V / 10 mA transistor
- Switching status is displayed with LED
- Controller outputs can be switched off manually,
or the analog display can be switched from system deviation to actual value.
- Sensor input for thermocouple type L, J, K, R, S or PT100 (2-wire), or 5 mA, 20 mA DC
- Direct-acting, reverse-acting sensor malfunction fuse
- Auxiliary voltages: 24 VAC, 110 VAC, 120 VAC, 220 VAC, 240 VAC
- Installation depth: 160 mm
|