产品详细介绍

产品概述：
TYTE-550X精小型系列电气转换器的功能是将电流或电压信号转换成线性比例的气压信号输出。它外壳精小、安装方便和调整容易，在狭窄空间的使用场合中非常理想。这种经济型仪表可为执行机构、阀门、定位器和其它终端控制设备提供精密的空气压力调节。内置容积增大器，提供大流量性能，增加在苛刻应用场合下的控制速度。多种接线和接口选择简单化了安装并降低安装所需时间。除了标准墙挂、盘装或管式安装，还可选择DIN轨道和集装组件。Type-925多功能集装件可为3、5、10、15台TYPE 550提供共同的供压气源接口和单个关闭阀。
特性：
外形精确：特别适用于高密集型安装。
接线简单：导轨、接线端或DIN43650接头方式
多种安装选择：墙挂、盘装或管道或集装式安装
前后端都设有输入输出接口：提供灵活的气动连接方式
外部零点和满度调整：方使现场校验
应用：
典型应用场合为阀门执行机构，阀门气动定位器，风门和百叶窗执行机构，终端控制设备，继电器，气缸，
丝网张紧装置，离合器和刹车装置。行业应用包括石化，HVAC暖通空调，能源管理，纺织，造纸，食品
半导体制造，印刷机械和医疗机械。
技术参数：
类型 标准型 零点可调型
输入 4-20mA 0-5VDC 1-5VDC 0-10VDC 1-9VDC 4-20mA 0-5VDC 1-5VDC 0-10VDC 1-9VDC
输出 3-15、3-27、6-30、1-17、2-60、3-120 0-30、 0-60、 0-120
耗气量 1.8 SCFH (0.05 m3/小时) 6.0 SCFH(0.17 m3/小时)
流量 7.7m3/小时(1.7BAR供压);20m3/小时(6.9BAR供压)34m3/小时(10BAR供压) 20m3/小时(6.9BAR供压);34m3/小时(10BAR供压)
最大供压 100 psig (6.90 BAR)；150 psig (2-60, 3-120 psig) 100 psig (6.90 BAR)；150 psig (0-120 psig)
精度 <±0.5%满量程 <±1.5%满量程
工作温度 -30℃~+65℃
供压灵敏度 <0.1% 满量程/1.0 psig (0.07 BAR) <0.02% 满量程/1.0 psig (0.07 BAR)

The Type-550X is an electronic pressure regulator that converts a variable signal (current or voltage) to a proportional pneumatic output. Its compact housing, accessible ports and easy adjustments provide an ideal answer to applications that are space-constrained. This economical instrument provides precision air pressure regulation to actuators, valves, positioners and other final control elements. An integral volume booster provides high flow capacity, increasing control speed in critical applications.

Multiple choices for wiring and porting simplify installation and decrease the time required to do so. In addition to standard wall, panel or pipe mounting, optional DIN rail and manifold mounting kits are available. The ControlAir Type-925 Multifunction Manifold provides a common supply port and individual shutoff valves for sets of 3, 5, 10 or 15 units.

Inputs

Outputs

1-17 psig
0.07-1.20 BAR

3-15 psig -
0.20-1.00 BAR

3-27 psig
0.20-1.80 BAR

6-30 psig
0.40-2.00 BAR

2-60 psig
0.20- 4.00 BAR

2-100 psig
0.14 - 6.70 BAR

Air Consumption

Supply Pressure

Note: Supply pressure must be a minimum of 5 psig above maximum ouput

100 psig (7.0 BAR) maximum

60 psig (4.00 BAR) maximum
for 1-17 psig output unit

4.5 scfm (7.6 m3/hr)
at 25 psig (1.7 BAR) supply

12.0 scfm (20.0 m3/hr)
at 100 psig (7.0 BAR) supply

Temperature Limits

Loop Load, I/P Transducer

Supply Voltage, E/P Transducer

Signal Impedance E/P Transducer

Accuracy, Hysteresis, and Repeatability

+ or - 0.10% of span

Deadband

0.02% of span

Position Effect

No measurable effect

Vibration Effect

Less than ĄŔ1.0% of span under the following conditions: 5-l5Hz @ 0.8 inches constant displacement; 15-500Hz @ l0g's

Supply Pressure Effect

No measurable effect

Temperature Effect

+ or - 0.045% / ^oF (0.07% / ^oC) of span

Reverse Polarity Effect

No damage occurs from reversal of normal supply current (4-20mA) or from misapplication of up to 60mA

RFI/EMI Effect

Pending

Port Sizes

Pneumatic...........l/4"NPT
Electric...............l/2" NPT

Media

Clean, dry, oil-free, air filtered to 40 micron

Mounting

Direct wall, panel, 2" pipe, or DIN rail (optional)

Materials

Housing: Chromate treated aluminum with epoxy paint. NEMA-4X (IP65). Elastomers: Buna-N. Trim: Stainless steel, brass, zinc plated steel

Weight

13.0 oz. (0 4 kg)