- CPTG
- GOSSEN
- 瑞士富巴(HUBA)
- 美国HTM接近开关、电感传感器...
- 美国美亚过程控制公司Meria...
- 物液位测量与控制
- 流量测量产品
- 过程称重与控制
- 电量测量与控制
- 液体分析与控制
- 气体分析与测量
- 压力测量与控制
- 温度测量与控制
- 阀门及气电转换产品
- 便携式检测仪器
- 系统与集成
- 美国诺南RONAN公司测控产品
- 美国ELECTROSWITCH...
- 美国PRECISION系列数字...
- 瑞士Rotronic温湿度产品...
- 阿通特斯 ATOMTEX 核辐...
- 德国GMC、瑞士CAMILLE...
- 英国盖姆(GEMS)/德国菲尼...
- 其它代理品牌
- MTR膜分离技术及logsto...
LS-7卧式液体传感器
Horizontal Liquid Sensor [Model LS-7]
Ronan Engineering抯 Models LS-7s and LS-7s Horizontal Liquid Sensors are designed to detect the intrusion of liquid in dry interstice double wall fiberglass tanks, containment zones and caisson compartments where horizontal positioning of the sensor is preferred. The integral Pull-to-Test cable on the LS-7s, required in some jurisdictions, allows sensor testing from ground level. Constructed of PVC the LS-7 and LS-7s will provide years of trouble-free service.
The LS-7抯 unique design cannot be installed upside down as is the case with sensors from other manufacturers. Liquid collection sufficient to raise the sensor float will transmit a signal to the control panel to initiate control functions or annunciate alarms.
The LS-7抯 thin cross section makes it ideal for applications where limited vertical clearance is available. The sensor may be installed in any horizontal application where there is 0.625 inches of vertical clearance.
Typical Applications
- Double Wall Fiberglass Tank Dry Interstice Monitoring
- Double Wall Piping Containment Sumps
- Horizontal Application Point Level Sensing
- Restricted Vertical Clearance
- Where Ground Level Testing is Required
Ronan抯 LS-7 Sensor operates on a direct principle. A glass encapsulated, hermetically sealed, reed switch is embedded within the sensor body. A permanent magnet in the sensors float creates a magnetic field which surrounds the reed switch holding the switch closed. When the magnetic field is removed by moving the float, the reed switch is actuated, thereby changing state. This condition opens a closed switch. This change in state is then signaled to the control panel.
Specifications
- Wetted Parts: PVC (Geon 87241)
- Installation: Horizontal, 0.635 inch minimum vertical clearance
- Switch Rating: SPST 10VA, 120-240Vac pilot duty
- Temperature Operating -40篎 to +140篎
- Liquid S.G.: 0.70 minimum
- Pressure: 50 psi maximum
- Cable: PVC jacket, twisted pair, 20AWG, 25 ft
Related Support Material : Horizontal Liquid Sensor Key: [L] = Registration Required - [R] = Reps Only | ||||||||||||||||||
|