MiniLEC系列电压监测继电器(通过美国ABS船级认证产品电气控制产品

设为首页 | 收藏本站

美国HTM接近开关、电感传感器、安全产品

美国美亚过程控制公司Meriam – Trusted Leader in Measurement and Calibration Solutions.

物液位测量与控制

流量测量产品

过程称重与控制

电量测量与控制

液体分析与控制

气体分析与测量

压力测量与控制

温度测量与控制

阀门及气电转换产品

便携式检测仪器

系统与集成

美国诺南RONAN公司测控产品

美国ELECTROSWITCH公司开关和继电器产品

美国PRECISION系列数字显示表

瑞士Rotronic温湿度产品及应用

阿通特斯 ATOMTEX 核辐射测量和监测产品

德国GMC、瑞士CAMILLEBAUER控制产品

英国盖姆（GEMS）/德国菲尼克斯产品

联系方式  联 系 人：叶先生 联系电话：[服务热线:0756-3895799]

[物液位测量事业部:0756-3895796]

[称重计量事业部:0756-3895797] 
              0756-3895793]

[流量测量事业部:0756-3895798]  

[系统集成事业部:0756-8585697]

[称重配料事业部:0756-3895793] 


称重配料系统-自动配料控制系统
  传真电话：0756-3892788

产品网（Combine）

谷瀑环保网（combine）

生意宝

工控网

阿里巴巴

称重配料系统

产品网

环保设备展

康宝莱国际网站

$吸入式带现场显示\非防爆型有毒气体探测器(墙挂安装)(竖式)$

首页 >>> 产品目录 >>> 电量测量与控制 >>> MiniLEC系列电压监测继电器(通过美国ABS船级认证产品

更详细的产品分类

产品图片	产品名称/型号	产品简单介绍
	CTD2三相电压监测继电器 CTD2	It is a 3 Phase,3 Wire Voltage Monitoring Relay. It is best suitable for monitoring Balanced or Unbalanced 3 phase 3 wire loads powered by Generators, UPS, Stabilizers, Inverters or Electricity Board (Utility). It is used to protect against fluctuating voltage to start standby generators, to operate mains failure units, Gensets, AMF Panels, PCC, Distribution boards and similar applications, where close regulation is required. Some of the other added advantages are easy & quick settings from fron
	CFD2三相电压监测继电器 CFD2	It is a 3 Phase,4 Wire Voltage Monitoring Relay. It is best suitable for monitoring Balanced or Unbalanced 3 phase 4 wire loads powered by Generators, UPS, Stabilizers, Inverters or Electricity Board (Utility). It is used to protect against fluctuating voltage to start standby generators, to operate mains failure units, Gensets, AMF Panels, PCC, Distribution boards and similar applications, where close regulation is required. Some of the other added advantages are easy & quick settings from fron
	MV1三相电压监测继电器 MV1	It is a 3 Phase, 3 Wire Voltage Monitoring Relay. It is best suitable for monitoring balanced or unbalanced 3 Phase 3 Wire loads powered by Generators, UPS, Stabilizers, Inverters or electricity Board (Utility). It is used to protect against fluctuating voltage to start standby generators, to operate mains failure units, Gensets, AMF Panels, PCC, Distribution boards and similar applications, where close regulation is required. Some of the other added advantages are easy & quick settings from fro
	CRD2单相电压监测继电器 CRD2	It is a 1 Phase Voltage Monitoring Relay. It is best suitable for monitoring1 phase 2 wire loads powered by Single Phase Generators, Stabilizers, Inverters or Electricity Board (Utility). It is used to protect against fluctuating voltage to start standby generators, to operate mains failure units, Gensets, AMF Panels, PCC, Distribution boards and similar applications, where close regulation is required. Some of the other added advantages are easy & quick settings from front. User friendly indica
	CSD1单相电压监测继电器 CSD1	It is a 1 Phase Voltage Monitoring Relay. It is best suitable for monitoring 1 phase 2 wire load powered by single Phase Generators, UPS, Stabilizers, Inverters & electricity Board (Utility). It is used to protect against fluctuating voltage to start standby generators, to operate mains failure units, Gensets, AMF Panels, PCC, Distribution boards and similar applications, where close regulation is required. Some of the other added advantages are easy & quick settings from front. User friendly in
	VTD1三相欠电压监测继电器 VTD1	It is a 3 Phase 3 Wire Under Voltage Relay. It is best suitable for balanced or unbalanced 3 phase 3 wire loads powered by Generators, UPS, Stabilizers, Inverters or electricity Board (Utility). It is used to protect against fluctuating voltage to start standby generators, to operate mains failure units, Gensets, AMF Panels, PCC, Distribution boards and similar applications, where close regulation is required. Some of the other added advantages are easy & quick settings from front. User friendly
	VFD1三线四相欠压继电器 VFD1	VFD1三相欠电压监测继电器电压监控继电器这些继电器对三相或单相电源工况进行监控。这些继电器适用于对发电机供电的平衡或不平衡三相三线、三相四线和单相负荷，UPS、稳压器、反相器或（多用途）电路板进行监控，防止电压波动启动备用发电机、电机、运行交流故障单位、发电机组、AMF面板、PCC、配电柜和类似用途。
	MV11单相欠电压/过载电压监测继电器 MV11单相欠电压/过载电压监测继电器	It is a 1 Phase Under Voltage Relay. It is best suitable for monitoring 1 phase pump / motor / machine loads powered by Single Phase Generators, UPS, Stabilizers, Inverters or electricity Board (Utility). It is used to protect against fluctuating voltage to start standby generators, to operate mains failure units, Gensets, AMF Panels, PCC, Distribution boards and similar applications, where close regulation is required. Some of the other added advantages are easy & quick settings from front. Use
	MV21单相欠电压/过载电压监测继电器 MV21	MV21单相欠电压/过载电压监测继电器单相欠压继电器这些继电器对三相或单相电源工况进行监控。这些继电器适用于对发电机供电的平衡或不平衡三相三线、三相四线和单相负荷，UPS、稳压器、反相器或（多用途）电路板进行监控，防止电压波动启动备用发电机、电机、运行交流故障单位、发电机组、AMF面板、PCC、配电柜和类似用途。
	VRD1单相欠电压/过载电压监测继电器 VRD1	VRD1单相欠电压/过载电压监测继电器单相欠压监控继电器这些继电器对三相或单相电源工况进行监控。这些继电器适用于对发电机供电的平衡或不平衡三相三线、三相四线和单相负荷，UPS、稳压器、反相器或（多用途）电路板进行监控，防止电压波动启动备用发电机、电机、运行交流故障单位、发电机组、AMF面板、PCC、配电柜和类似用途。
	VRD2单相欠电压/过载电压监测继电器 VRD2	It is a 1 Phase Over Voltage Relay. It is best suitable for monitoring 1 phase, 2 wire loads, Generators, UPS, Stabilizers, Inverters or electricity Board (Utility). It is used to protect against fluctuating voltage to start standby generators, to operate mains failure units, Gensets, AMF Panels, PCC, Distribution boards and similar applications, where close regulation is required. Some of the other added advantages are easy & quick settings from front. User friendly indications. DIN Rail mounti
	S2VMR3电压继电器 S2VMR3	S2VMR3电压继电器三相供电监视相故障、相失衡及逆相保护，欠／过电压保护可调节的相位失衡保护可调节的欠压／过压设置可调节的跳闸延时预置的电源开启延时2CO 继电器输出
	S2VMR4三相三线欠/过电压继电器 S2VMR4	S2VMR4三相三线欠/过电压继电器不带中性线的三相供电监视可调节的欠压／过压设置可调节的电源开启延时和跳闸延时单独／联合欠压、过压继电器输出错误安全／非错误安全模式可供选择
	S2VMR5三相四线欠/过电压继电器 S2VMR5	S2VMR5三相四线欠/过电压继电器带中性线的三相供电监视可调节的欠压／过压设置可调节的电源开启延时和跳闸延时单独／联合欠压、过压继电器错误安全／非错误安全模式可供选择
	UVFD1三线四相欠压继电器 UVFD1	UVFD1三线四相欠压继电器电压监控继电器这些继电器对三相或单相电源工况进行监控。这些继电器适用于对发电机供电的平衡或不平衡三相三线、三相四线和单相负荷，UPS、稳压器、反相器或（多用途）电路板进行监控，防止电压波动启动备用发电机、电机、运行交流故障单位、发电机组、AMF面板、PCC、配电柜和类似用途。
	OVRD1单相过压继电器 OVRD1	OVRD1单相过压继电器单相过压继电器这些继电器对三相或单相电源工况进行监控。这些继电器适用于对发电机供电的平衡或不平衡三相三线、三相四线和单相负荷，UPS、稳压器、反相器或（多用途）电路板进行监控，防止电压波动启动备用发电机、电机、运行交流故障单位、发电机组、AMF面板、PCC、配电柜和类似用途。
	HLSD2/HLVD2/ALVD2/P2PFV1三相监控欠/过电压继电器 HLSD2/HLVD2/ALVD2/P2PFV1	HLSD2/HLVD2/ALVD2/P2PFV1三相监控欠/过电压继电器欠/过电压断相继电器用于监控AMF/转换开关面板及泵控制装置和三相空调控制面板中交流三相电源电压的一般性电压故障。 VPG D1用于保护水泵断相、相序、相位失衡和干运转故障。DIN轨模，安装在典型插座中的8针或11针插头，安装有96×96mm 镶板门的外罩。特点：1、继电器用于监控3相电压供应。2、多功能型号，像断相、相序、相失衡以及干运转型号，或欠压或欠压＋过压等型号3、可调节断路电平设置值的型号4、监控欠／过压的辅助电压。5、由外置或内置的配套供电装置供电供电装置6、自动重置，人工／遥控重置7、1个或2个CO输出值8、DIN轨模或插头安装在配有外罩的插座或嵌入式平板中
	VCFD2欠/过电压继电器 VCFD2	VCFD2欠/过电压继电器电压监控继电器这些继电器对三相或单相电源工况进行监控。这些继电器适用于对发电机供电的平衡或不平衡三相三线、三相四线和单相负荷，UPS、稳压器、反相器或（多用途）电路板进行监控，防止电压波动启动备用发电机、电机、运行交流故障单位、发电机组、AMF面板、PCC、配电柜和类似用途。
	VCTD2欠过电压继电器 VCTD2	VCTD2欠/过电压继电器电压监控继电器这些继电器对三相或单相电源工况进行监控。这些继电器适用于对发电机供电的平衡或不平衡三相三线、三相四线和单相负荷，UPS、稳压器、反相器或（多用途）电路板进行监控，防止电压波动启动备用发电机、电机、运行交流故障单位、发电机组、AMF面板、PCC、配电柜和类似用途
	VCSD1单相电压监视继电器 VCSD1	VCSD1单相电压监视继电器单相电压监视继电器这些继电器对三相或单相电源工况进行监控。这些继电器适用于对发电机供电的平衡或不平衡三相三线、三相四线和单相负荷，UPS、稳压器、反相器或（多用途）电路板进行监控，防止电压波动启动备用发电机、电机、运行交流故障单位、发电机组、AMF面板、PCC、配电柜和类似用途。

共2页

[首页][前页]

[后页][尾页]

康宝莱仪表（珠海）有限公司
电话：[服务热线:0756-3895799] [物液位测量事业部:0756-3895796] [称重计量事业部:0756-3895797] 0756-3895793] [流量测量事业部:0756-3895798] [系统集成事业部:0756-8585697] [称重配料事业部:0756-3895793] 称重配料系统-自动配料控制系统传真：0756-3892788
地址：珠海市香洲区人民西路华达工业区8栋邮编：519000 粤ICP备07043584号-1 网站管理入口
网络推广：仪表展览网技术支持：易展

点击客服TM号码

即时沟通或交流